| |
THE ADVANTAGES
• For truck control, you can set your reference 20 to 30 feet out in front of
the vehicle impacting on the road. For gun package control the laser is used to
give the Operator "heads up" time to
move the gun package in and out for easy and precise alignment.
• You are looking in your natural driving field of view at the reference point.
• You can reduce or eliminate pre-marking and the high cost associated with it.
• Eliminates using a boom and the problems associated with it such as bouncing
on rough surfaces, safety, and the mechanical size and constraint of the
mechanism
.
• Safer! Paint up to intersections
without the worry of injury or damage to people or other vehicles caused by
mechanical arm extending out in front of the truck.
• Eliminates having to drive looking at a T.V. screen instead of the road.
Reduces or eliminates the problem of "white-out" in low sun conditions.
• Greatly increases the machine’s maneuverability.
• You can move your reference on the fly from the cab — aim the laser spot
further out, closer in, further left, or further right.
• Much less strain on the Operator. It reduces fatigue and increases skill load
.
• It's more versatile.
• It’s easier.
• It’s faster.
• It’s safer. |
|
THE PRODUCT
• Main Housing —Weatherproof containing optic plate mounting platform, micro
processor electronics laser, laser mounting assembly, laser driver board,
automatic cooling and heating system, and in the remote version, X-Y
positioning control mechanism, drive motors, and optics. The entire unit
is dry nitrogen purged to protect all components.
• 20 Feet of Interconnect Cable with a waterproof mil spec, in-line connector
mounted between the laser main housing and the control panel mounted in the
cab.
• Control Panel allows the Operator to turn the unit on and off on the manual
version as well as aim the laser spot toward or away from the vehicle as well
as left and right on the remote control version.
• 5 Feet of 12 Volt DC Cable running from the control box for connection to
vehicle’s 12 V power.
SPECIFICATIONS
Laser: 532nM Class IIIA Green Laser
Power:11-15 Volt DC Positive or Negative Ground
Power Draw:4.00 Amps (Maximum Operating), 0.03 Amps (Sleep Mode)
Laser Housing GL3000P (Remote):
Height:6 1/8 Inches
Length:12 Inches
Width-Housing:6 1/2 Inches
Base:9 1/2 Inches
Laser Housing GL3000PM (Manual):
Height:4 1/2 Inches
Length:9 Inches
Width Housing:3 3/4 Inches
Base:4 1/4 Inches
Cable length from Laser Housing to Control Box: 20 Feet
12 Volt Power Cable Length
from Control Box: 5 Feet
Shipping Weight: 25 lbs.
|
|
