T-2000
The T-2000 is a heavy-duty "building
block" design built for the rigors
of the toughest construction
environments. The T-2000 may be added to from its basic
configuration, depending on the
needs of your particular job or
application.
The T-2000 laser beam is fixed focused
to infinity. This provides the
smallest possible spot over the longest
possible distance.
High power. 5 Milliwatts of power
assures you of more range to target
area, even in adverse weather or when
shooting through a series of forward
targets.
Ultra-fine horizontal and vertical fine
adjust for fast and precise alignment on
your set-ups.
Very stable; once set in place, the
T-2000 stays on your forward target!
T-2000 is designed to accept a tribrach.
This is especially beneficial when "leap
frogging" to forward points in tunnel
work.
In tunnel work, the T-2000 has three
times the range (laser spot brilliance
and quality) thus reducing the need to
move the laser forward.
In marine work, it translates to much
greater visibility in adverse weather
conditions.
T-2000-0
Designed for shorter range
applications requiring the ability to
pre-position the laser to a forward
point then lock it in place for maximum
holding stability. The T-2000-0
features the same laser
power and spot brilliance as its
bigger brother, the T-2000, but at a
more affordable cost. Once in place, it
stays there!
|
|
LR-1050D/LR-2020D
The LR-Series was designed for long
distance alignment applications
where the ability to turn an angle
is desired or required. The
LR-Series features a large, easy to
read LCD Direct Reading Digital
Display for horizontal and vertical
angles. This adds versatility in
hard to set up locations, allowing
the operator to turn angles from a
known point. A foresight is not a
necessity. The laser beam is fixed
to the vertical cross hair of the
spotting scope, thus eliminating the
need for a reflector or penta prism
as a foresight.
The laser beam is fixed focused to
infinity. This provides the smallest
possible spot over the longest possible
distance.
5 Milliwatts of power assures you of
more range to target area even in
adverse weather or when shooting through
a series of forward targets.
Some of the digital features include:
Digital Display of Angle for
both vertical and horizontal angles are
obtained and displayed in degrees or
gons (internal switch).
A large, alphanumeric dual-line LCD
screen allows both vertical and
horizontal angles to be displayed
simultaneously. Symbols on the LCD are
clear and easy to read for convenient
operation even in dim light.
By simply pressing the "R/L " key, the
LR-Series performs clockwise or counter
clockwise horizontal angle measurement.
|
